Deutsch:

Hier die Changelog für den Gemüseanbau ab V1_6!!!

Was ist zu beachten:

Es gibt insgesamt 4 Rückwärtskurse die jeweils zu 2 Gewächshäuern führen.

2 Trigger für Kompost/Mist, 2 Trigger für Wasser.


Bitte wählt immer den Zielpunkt der ganz hinten am Zaun ist, (zum ausladen) das gilt für Kompost/Mist sowie für Wasser.

Also in diesem Fall: 
GH- Paprika 1 Kompost/Mist u. GH- Paprika 1 Wasser, 
GH- Salat 1 Kompost/Mist u. GH- Salat 1 Wasser,
GH- Salat 3 Kompost/Mist u. GH- Salat 3 Wasser,
GH- Tomate 1 Kompost/Mist u. GH- Tomate 1 Wasser,

Ich gebe euch ein zB: wie es funktioniert, Ihr wällt GH- Paprika 1 Kompost/Mist als Ziel, wird aber erst bei GH- Paprika 2 Kompost/Mist ausgeladen, weil dieses Ziel zuerst auf seinen Rückwärtskurs angefahren wird, und das eigentliche Ziel noch nicht erreicht ist.

Das ist so von mir beabsichtigt.

Habe es auch anders versucht, in dem aus GH- Paprika 1 Kompost/Mist, GH- Paprika 2 Kompost/Mist wurde, und umgekehrte dann passiert folgendes GH- Paprika 1 Kompost/Mist wird angefahren aber um zum nächsten Ziel zu kommen dreht das Fahrzeug einfach um 
und versucht es Vorwärts anzufahren und der Rückwärtskurs wird nicht fortgesetzt und das Fahrzeug landet im Zaun. 

Die Möglichkeit das ein Fahrzeug im Zaun landet besteht auch jetzt noch aber sie ist viel geringer.

In diesem Fall musste ich AutoDrive ein bisschen austricksen, weil rückwärtsfahren mit mehreren Zielen ist nicht vorgesehen. 

Und bitte vergesst nicht in den AutoDrive Fahrzeug Einstellungen Die mehrere Ziele (oder auch Be-Entladen, oder nur Entladen)
aus zu wällen.


Gruß
LS15-17-19Farmer


Englisch:

Here is the changelog for growing vegetables from V1_6!

What is to be considered:

There are a total of 4 reverse courses that each lead to 2 greenhouses.

2 triggers for compost / manure, 2 triggers for water.


Please always choose the target point that is at the very back of the fence (for unloading) this applies to compost / manure as well as water.

So in this case:
GH paprika 1 compost / manure u. GH paprika 1 water,
GH salad 1 compost / manure u. GH salad 1 water,
GH salad 3 compost / manure u. GH salad 3 water,
GH tomato 1 compost / manure u. GH tomato 1 water,

I give you, for example: how it works, you choose GH-Paprika 1 compost / manure as a target, but will only be unloaded at GH-Paprika 2 compost / manure because this target is first approached on its reverse course, and the actual target still is not reached.

That is what I intended.

I tried it differently, in which GH paprika 1 compost / manure, GH paprika 2 compost / manure, and the reverse then happens the following GH paprika 1 compost / manure is approached but to get to the next destination the vehicle turns just around
and tries to move forward and the reverse course is not continued and the vehicle ends up in the fence.

The possibility that a vehicle will end up in the fence is still there, but it is much less.

In this case, I had to trick AutoDrive a bit, because reversing with multiple destinations is not intended.

And please do not forget in the AutoDrive vehicle settings the multiple destinations (or also loading / unloading, or only unloading)
to rampage out.


greeting
LS15-17-19 Farmer

   